NC Angler Forums banner
1 - 2 of 2 Posts

·
Banned
Joined
·
1,875 Posts
Discussion Starter · #1 ·
Converted the boat trailer to a heavy duty flat bed, 8' x 8', and a kayak trailer.
Tee sections are anchored by 2 carriage bolts and one lag bolt. So by removing six (6) bolts, I can convert the kayak trailer to a flat bed trailer.
Flat bed was made from three (3) cross members that are 4" x 4" with a 2" x 4" glue and screwed on top of the 4 x 4. Then for the bed I have 2" x 10" glued and screwed to the cross members.
I need to mount some rod holders to the front. This way when I carry the rod to go fishing, I can wash the yaks and rods at the same time.

Wheel Plant Wood Street furniture Tree
Wheel Tire Vehicle Motor vehicle Automotive tire
Wheel Tire Plant Vehicle Motor vehicle
Wood Road surface Plank Wood stain Outdoor furniture
 

·
Red X Angler
Joined
·
16,054 Posts
and looks like if you flip it over it makes one heck of a picnic table too!! very nice and sturdy!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top